TML Series

HOME > Lathe > TML Series

  TML SERIES
 
 
  • All models with one piece solid stand.
  • All models with universal feed gearbox & reversable apron.
  • All models meet CE. (on request)
  • All models with 52.5mm (2.066") spindle bore, ASA D1-6.

 
  • All castings are properly stabilized and stress relieved.
  • Bed ways are hardened & ground to min. HS-70.
  • Turcite B coating between the bed and carriage.
  • Extremely low noise level.
  • Foot brake pedal provided.
  • Built-in coolant pump & fitting provided.
  • Wider bed way which give absorbs vibration.

HEADSTOCK

  • Housing is vibration-absorbent, deflection-free.
  • Gears are hardened & MAAG or REISHAUER ground.
 

GEAR BOX

  • Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.
 

APRON

  • R/H or L/H wheel can be available on request.
  • Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds.
 

CARRIAGE & SLIDE

  • Anti-Float design backlash eliminator fitted in cross slide nut.
  • Safety clutch at feed shaft.
  • One shot lubrication in carriage & top slide.
  • Dual dials supply inch system screw.
  • Metric dial supply metric system only.

SAFETY FEATURES

  • Nylon safety gears in end train.
  • Shear pin in leadscrew.
 

HEAVY DUTY SPINDLE

  • Machined from forged alloy steel, hardened ground & dynamically balanced.
  • Three point support by high grade precision, machine tool taper roller & ball bearings.


    TML-1640/1660
 
    Photo shown model: TML-1640

 

 

 

 


 

Front moveable slide chip tray
 
 
 

STANDARD ACCESSORIES:

  1. Backplate for 9" chuck
  2. Dead center MT.4
  3. Dead center MT.4 with carbide tip
  4. Spindle center sleeve MT.6
  5. Level pads......6 pcs
  6. Tool set & Box
  7. Operation manual & parts list
 
 

OPTIONAL ACCESSORIES:

  1. 3-Jaws scroll 9" chuck
  2. 4-Jaws independent 10" chuck
  3. 5C collet closer attachment
  4. 5C collets (metric or inch)
  5. Driving plate with dog
  6. Chuck safety guard
  7. Hydraulic copying attachment
  8. Tool post grinder attachment
  9. Taper turning attachment
  10. Electrical system for CE
  11. Protect cover on leadscrew for CE

 

  1. Steady rest w/ball bearing
  2. Follow rest w/bronze tip
  3. Faceplate 12"
  4. Drill chuck & arbor
  5. Rotating center MT.4
  6. Halogen lamp
  7. Quick change tool post
  8. Carriage micro stop set
  9. Digital read out system
  10. Full length splash guard
 
 
SPECIFCATIONS
  MODEL TML-1640 TML-1660
Capacity Height of centers 205 mm (8.07")
Swing over bed Ø410 mm (16.14")
Swing in gap Ø583 mm (22.95")
Swing over cross slide Ø264 mm (10.39")
Distance between centers 1000 mm (40") 1500 mm (60")
Width of bed 260 mm (10.236")
Gap width in front of faceplate 135 mm (5.31") 225 mm (8.85")
Headstock
and
Main Spindle		 Spindle nose, internal taper D1-6, MT. No.6
Spindle center sleeve MT. No.6 x MT. No.4
Spindle bore Ø52.5 mm (2.066")
Spindle speed: Gear steps
/
Range
Carriage Length on bed / Width of carriage 513 mm (20.19") / 412 mm (16.22")
Cross slide travel 220 mm (8.6")
Top slide travel 130 mm (5.1")
Threads
and
Feeds		 Whitworth threads: Kinds / Range 45 Kinds / 2~72 T.P.I.
Metric threads: Kinds / Range 39 Kinds / 0.2~14 mm
D.P. threads: Kinds / Range 21 Kinds / 8~44 D.P.
M.P. threads: Kinds / Range 18 Kinds / 0.3~3.5 M.P.
Longitudinal feeds 0.05~1.7 mm (0.002"~0.067")
Cross feeds 0.025~0.85 mm (0.001"~0.034")
Tailstock Quill diameter Ø52 mm (2.47")
Quill travel 152 mm (6")
Taper of center MT.No.4
Motor Main spindle 5HP
Coolant pump 1/8HP
Measurement Weight (Net /Gross) Approx. 1500 / 1650 kgs 1600 / 1750 kgs
Packing sizes Length 2270 mm (89.4") 2785 mm (109.7")
Width x Height Width 1120 mm (44.1") x Height 1745 mm (68.7")
■ Specifications subject to change without notice.